p.
4
- Manual
FA01313-EN
- 02/2019 - © C
AME S.p.A. - The contents of this manual may change, at any time, and without notice. - Original instructions
Before turning over to the final user, check that the system complies with the harmonized standards and the essential
requisites of Machinery Directive 2006/42/CE.
Any residual risks must be indicated clearly with proper signage affixed in visible areas. All of which must be explained to
end users.
Fit, in plain sight, the machine's ID plate when the installation is complete.
If the power-supply cable is damaged, it must be immediately replaced by the manufacturer or by an authorized technical
assistance center, or in any case, by qualified staff, to prevent any risk.
Keep this manual inside the technical folder along with the manuals of all the other devices used for your automation
system.
Remember to hand over to the end users all the operating manuals of the products that make up the final machinery.
