p.
11
- M
an
ua
l
FA
00
441
-E
N
- 0
8/
20
18 - © C
AM
E S
.p
.A
. -
Tr
an
sla
tio
n o
f t
he o
rig
in
al i
ns
tru
ct
io
ns
INSTALLATION
⚠
Only skilled, qualified staff must install this product.
⚠
The following illustrations are mere examples in that the space for fastening the operator and accessories
varies depending on the installation area. It is up to the fitter, therefore, to choose the most suitable solution.
The following figures show a standard installation with the gearmotor and transmission arms fitted to
the left of the inward-opening gate. Fitting the gearmotor with the transmission arms to the right is done
symmetrically. Careful! For outward opening gate leaves, follow the chapter titled "INSTALLING AND
CONNECTING FOR OUTWARD OPENING".
INITIAL WORKS
Fit junction boxes and corrugated tubing needed for the incoming connections from the distribution pit.
The number of tubes depends on the type of system and the accessories you are going to fit. You will need at
least two corrugated tubes where the operator is installed (on the gate leaf that opens first).
