Page
7
- Manual
FA01947-EN
- 03/2023 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Control board
Before working on the control panel, disconnect the mains power supply and remove the batteries, if any.
Use DIP switches to set functions and the trimmer for adjustments.
All connections are protected by quick fuses.
For the system to work properly, before fitting any plug-in card, DISCONNECT THE MAIN POWER SUPPLY and remove any batteries.
1
DIP switches
2
Trimmer
3
Button for programming
4
Alert LED
5
Control button
6
Terminal board for encoders and limit switches
7
Terminal board for connecting control and safety devices
8
Terminal board for connecting the keypad selector
9
Terminal board for connecting the gearmotor
10
Terminal board for powering accessories
11
Terminal board for powering the control board
12
Fuse for accessories and control board
13
Terminal board for connecting the antenna
14
Connector for plug-in radio frequency card (AF)
15
Terminal board for Green Power module
16
Component for R800 card
17
Power supply terminal board
18
Line fuse
1
2
3
4
5
16
14
15
11
12
6
9
10
7
8
13
17
18
Remove the card cover before inserting the cards into the connectors.
OK
