21
General Info
INSTRUMENT MAINTENANCE
If possible, always put away the Instrument into its suitcase.
n
To replace the 9V battery, you have to proceed in the following manner: unscrew the rear lid, remove the clip-connector from the exausted
n
battery, replace the battery with an equivalent one (high capacity Alcaline), and close again the lid with screws, paying attention to embed
correctly the battery on the lid seat.
In the case of intensive use, clean the Instrument with a lightly wet cloth.
n
Don’t try to remove the lateral screws, and the screws on the aluminium head, because they are internally blocked.
n
EN 12445 norm, says that instrument must be re-calibrated at least one time for year. Calibration must be carried out only by producer's
n
laboratory. Microtronics suggests to calibrate the instrument every time it had to suffer a fall or a bump, transversal to normal direction of
force measuring.
WARRANTY CONDITIONS
The hardware of the product is guaranteed 24 months from date of purchase. During this period, we replace or repair the piece found to be
n
defective from the origin, free of charge, only if customer can show the purchase receipt. Products to be repaired, have to be sended at
charge of customer. Warranty does not cover:
Any aesthetical imperfection, dued to normal production process.
n
Normal consumption of the instrument.
n
Damages caused by inadeguate or improper repairs, carried out by not authorized people.
n
Damages caused by negligence, accidents, modifications, or other use, different from what is written in this manual.
n
Possible bugs (imperfections) of software, and/or incompatibility with PC or other external peripherals.
n
Damages dued to transport.
n
RESPONSIBILITY
REMARK: The indication of NEGATIVE RESPONSE / POSITIVE RESPONSE returned by instrument and/or by software, must be considered
n
merely a suggestion.
Microtronics Srl is not responsible in any way, for any possible damage or injury to people/things, that may come from wrong interpretation
n
of tests results, or from improper use of the instrument.
SOFTWARE USER LICENCE
It is granted only one user licence for the software “Blue Force”, valids for installation on only one PC and one POCKETPC.
n
All programs and files enclosed with MICROTRONICS products, belongs to their producers and are copyright protected.
n
It is not allowed to copy, modify, disassemble, even partially, software provided with MICROTRONICS products
n
GENERAL INFO
Information in this document is subject to change without notice. - 2006-2015 Microtronics S.r.l. All rights reserved -
n
Reproduction in any manner whatsoever without the written permission of Microtronics is strictly forbidden.
n
The Microtronics logo, and Blue Force are trademarks of Microtronics S.r.l. Microsoft and Windows are registered trademarks of Microsoft
n
corporation. Microtronics disclaims any proprietary interest in the marks and names of others.
IMPROPER USE OF THE INSTRUMENTS
MICROTRONICS WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL
n
DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF MICROTRONICS, OR ITS RESELLER, HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
RAEE Refuses Norm about electric and electronic equipments
In European Community, this label means that this product has not to be
n
disposed together with domestic refuses. It must be put in a suitable
plant, which must be capable to carry out recovery and recycling.
