p.
36
- Manual
FA01443-EN
- 01/2020 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
ERROR MESSAGES
Calibration error
Interruption of the boom travel calibration due to the presence of an obstruction.
The Encoder does
not work
The Encoder is disconnected.
The Encoder is broken.
Service test failure
error
Presence of an obstruction within the range of the photocells.
The photocells are not correctly connected or configured.
The photocells are faulty.
Door lock open
The operator is released.
Maximum number
of closing obstacles
The maximum number of obstacles detected consecutively has been exceeded
Maximum number
of opening obstacles
The maximum number of obstacles detected consecutively has been exceeded
Maximum number
of obstacles
The maximum number of obstacles detected consecutively has been exceeded
Communication
error
Configured on the wrong RSE port.
Incompatible remote
control
The transmitter used is not CAME.
The coding set is different from that of the transmitter.
The transmitters are TWIN and have different KEY BLOCK.
Slave door open
The SLAVE operator is released.
No communication
from the RIO system
The wireless module is not plugged into the connector on the control board.
The wireless module is broken.
RIO system not
configured
The wireless system has not been configured.
The wireless devices have not been configured.
