CAMDEN Invision CV-TAC400 Installation Manual Download Page 61

Page: 61 / 124

CV-TAC400 Installation Guide |

File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113

h. When the editing for the selected Access Level is complete, select

the “Save” button (on the bottom

left-hand side of the form).

17. Entering Suite Information

Changing/Adding Suite Information

Floor, Express Code, Display Name, Telephone Number

Note:

All the Suite records are already in the factory default file. The information has been set
to blank. To add a suite merely select a blank record and enter the information.

Select the “View/Edit Data Records” Menu. A list of submenus will be displayed

Select the “Suite/Directory Data” submenu. The Suite/Directory Data window will be displayed.

Note:

The “Remote ELP DIP” field is not used and should not be changed.

l. Select the suite to be changed from the drop down list, in the Suite ID-Display Name field

Note:

You may use the up or down arrows to scroll through the list of suites. You may also use the

pg up (page up) and pg dn (page down) keys to scroll the list quickly.

m. If required, Select the

Floor

from the list of Floors in the pulldown menu

n. If required, Edit the

Express Code

in the “Express Code” field

o. If required, Edit the

Display Name

in the “Display Name” field

p. If required, Edit the

Telephone Number

in the “Telephone Num” field.

q. When the editing for the selected suite is complete,

select the “Save” button (on the bottom left-

hand side of the form).

r. When the editing for all the suites is complete, select the Close button(on the bottom right-hand

side of the form)

Summary of Contents for Invision CV-TAC400





























































































































Search results

Summary of Contents for Invision CV-TAC400

Reviews:

Related manuals for Invision CV-TAC400

Brands by name

Popular brands

CAMDEN Invision CV-TAC400, Installation Manual

Search results

Summary of Contents for Invision CV-TAC400

Reviews:

Related manuals for Invision CV-TAC400

Brands by name

Popular brands