CAMDEN Invision CV-TAC400 Installation Manual Download Page 118

Page: 118 / 124

CV-TAC400 Installation Guide | 118

File: CV-TAC400_IN_MAN__NF_REV6.doc
Revised: September 2, 2014
Part No: 40-82B113

15, Configuring Users for Access Control

Configuring a user means entering the numeric codes of the user’s keyfob/card and/or transmitter and
assigning the user an Access Level.

A. Adding a New User

To add a new user follow the steps below:

Select the “View/Edit Data Records” Menu. A list of submenus will be displayed

Select the “Suite/Directory” submenu. The Suite/Directory Data window will be displayed.

c. Select the suite the user resides in,

from the “Suite ID – Display Name” field. All the users from that

suite will be displayed in the “User Information” table.

Note: If the user does not reside in a suite, for example a cleaner, select a Suite ID that is not used

for an actual suite. If this unused suite has a blank “Display Name” it will not show up in the
directory.

Select the “Add User” button. The “Add New User” form will be displayed.

Summary of Contents for Invision CV-TAC400





























































































































Search results

Summary of Contents for Invision CV-TAC400

Reviews:

Related manuals for Invision CV-TAC400

Brands by name

Popular brands

CAMDEN Invision CV-TAC400, Installation Manual

Search results

Summary of Contents for Invision CV-TAC400

Reviews:

Related manuals for Invision CV-TAC400

Brands by name

Popular brands