CAMCO MFG., INC.
121 Landmark Drive / Greensboro, NC 27409 / USA
1-800-334-2004
www.camco.net
Other
Camco Products
Stabilizing Trailer Jacks
• Extends from 11" to 17" (28 to 43 cm)
• Permanent handle
• Heavy duty noncorrosive cast aluminum base
• Max. capacity: 6000 lbs per jack
• Set of two or four per box
44561 (Qty: 2)
44560 (Qty: 4)
Wheel Chocks
Sway Control
• Chocks keep your trailer in place so you can
re-hitch or level with confidence
• Solidly constructed of durable hard plastic with
UV inhibitors
44412 - Chock
44472 - Chock (with pull rope)
44492 -
Super
Chock
• Diminishes sway from windy conditions or passing vehicles
• Provides constant and adjustable sway reduction
• Dual friction brake pad system
• Secures with socket and spring clips
• Detaches quickly for storage
48380 - Right
48381 - Left
Sway Control Adapter
Telescopic Stabilizing Jacks
• Zinc-Plated Inner Tube and Screw Assembly
• Adjustable from 16" to 30"
• Quick and Easy Pull Pin
• Steel Construction - Painted Black
• 6000 lb. Load Capacity
48860 (Qty: 2)
Recurve R6 Weight Distributing Hitch
• Adaptive Sway control
• User friendly
• Reduced noise
48731 - 600 lb Recurve R6
48733 - 1,000 lb Recurve R6
48734 - 1,200 lb Recurve R6
FasTen Leveling Blocks
• Carry Handle
• Customize your levels
• Safe and easy to use
44512 - 2x2, Yellow 10 pack
44515 - 4x2 Yellow 10 pack
44521 - 2x2, Brown 10 pack
44525 - 4x2, Brown 10 pack
• Fits most competitor's brands of ball mounts
with 1" ball shank hole
• For 2 inch ball mounts
• Used on left or right side
• Bolts together
48386
Does not include ball or utility ball mount.
LIMITED WARRANTY
This Warranty applies solely to the Scissor Jacks (the “Product”) manufactured by Camco Manufacturing, Inc. (“Camco”)
1. Warranty and Warranty Period. Camco warrants to the original purchaser or consumer (the “Purchaser”) of the Product
will be free of defects in manufacture and workmanship for a period of 12 months from the date of consumer purchase
or Camco will replace the Product free of charge (the "Warranty"). This Warranty is non-transferrable and applies only
to the original vehicle on which the Product was installed.
2. Limitations on the Warranty. This Warranty does not cover the following: (a) normal wear and tear; (b) service or labor
charges which are incurred in removing or replacing any Product; (c) the finish placed on the Product; (d) Product
damage or failure which occurs as a result of abuse, neglect or misuse in any manner; and (e) damage which occurs to
a Product that is misapplied, overloaded, improperly installed, or altered in any manner by anyone other than Camco.
3. Obligation of Purchaser. To obtain the benefits of this Warranty, the Purchaser must complete the following steps:
(a) promptly present the defective Product together with the proof of purchase to any of Camco dealer, distributor, or
return it to the factory located at 121 Landmark Drive, Greensboro, NC 27409 and (b) pay all handling, transportation,
and shipping charges incurred for the return of the defective Product. Any defective Product returned to Camco shall
become the property of Camco.
4. Obligations of Camco. Subject to the terms and limitations set forth in this Warranty, Camco’s sole obligation will be to
replace for the original Purchaser free of charge any Product that is found to be defective.
5. Legal Rights. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE. CAMCO MAKES NO EXPRESSED OR IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
CAMCO ASSUMES NO LIABILITY OR RESPONSIBILITY FOR BODILY INJURY THAT MAY BE INFLICTED ON THE
PURCHASER, OPERATOR, SPECTATOR OR GENERAL PUBLIC WHO IS THE IN THE GENERAL AREA WHILE THIS
EQUIPMENT IS IN USE, FOR THE LOSS OF THE USE OF ANY VEHICLE, LOSS OF TIME, RENTAL OF VEHICLES,
LOSS OR DAMAGE TO PERSONAL PROPERTY, EXPENSES SUCH AS GASOLINE, TELEPHONE, LODGING, OR
TOWING, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES INCURRED AS A RESULT OF THE USE OR
OWNERSHIP OF ANY PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF A LIMITATION OF INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES, SO THE EXCLUSION OR LIMITATION SET FORTH MAY NOT APPLY TO YOU.
REPLACEMENT OF THE PRODUCT IN THE MANNER PROVIDED ABOVE SHALL CONSTITUTE FULFILLMENT OF ALL
LIABILITIES OF CAMCO TO THE PURCHASER WHETHER BASED ON CONTRACT OR OTHERWISE.
CAMCO RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR TO MAKE ADDITIONS OR IMPROVEMENTS
WITHOUT BEING OBLIGATED TO INSTALL THE SAME UPON PRODUCTS COVERED BY THIS WARRANTY. THIS
WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA.
CHOCK
Speed Crank Handle
• Design for lifting and lowering Scissor Jacks
• 3/4" socket-end speed wrench
• Easy grip handle which turns while cranking
• Chrome-plated finish
57874
