vehicle components. After lifting, loads
must be immediately supported by
appropriately rated jack stands. Check
with vehicle manufacturer’s owners
manual for proper lift points. This jack
complies with applicable ANSI/PALD
Standards.
• Study, understand, and follow all
instructions before operating this
device.
• Do not exceed rated capacity.
• Use only on hard, level surface.
• Lifting device only. Immediately after
lifting, support vehicle with
appropriate means.
• Do not move or dolly the vehicle
while on the jack.
• Ensure that the lift point is properly
centered on the jack saddle.
• Lift only on areas of the vehicle as
specified by the vehicle
manufacturer.
• No alteration of this product is
allowed.
• Failure to heed any one or
combination of these warnings may
result in severe personal injury and/
or property damage.
PREPARATION
Before Use
1. Assemble the 2-piece handle with
provided bolt.
2. Always secure the handle into the
handle fork by means of the bolt and
lock washer provided. Tighten securely
to prevent accidental removal of
handle while in use.
Do not lift or carry jack by handle.
Handle could dislodge and jack fall,
resulting in possible injury or property
damage.
Any equipment that appears damaged in
any way, is found to be worn, or operates
abnormally shall be removed from service
until repaired. If the equipment has been
or is suspected to have been subjected to
an abnormal load or shock, immediately
discontinue use until inspected by a factory
authorized repair facility (contact distributor
or manufacturer for list of authorized repair
facilities). It is recommended that an annual
inspection be made by an authorized repair
facility. Labels and Operator's Manuals are
available from the manufacturer.
PRODUCT DESCRIPTION
Westward Hydraulic Quick Lifting Jack is
designed for lifting, but not sustaining
rated capacity loads. The Service Jack
with Quick Lift System providing one
pump to lift point contact, which allows a
no-load lift possible in seconds. Intended
use: To lift one axle of a vehicle for the
purpose of service and /or repair of
SAFETY AND GENERAL
INFORMATION
Save these instructions.
For your safety,
read, understand, and follow the information
provided with and on this device before
using. The owner and/or operator shall
have an understanding of the device,
its operating characteristics and safety
operating instructions before operating the
equipment. The owner and/or operator shall
be aware that use and repair of this product
may require special skills and knowledge.
Instructions and safety information shall
be read to and discussed with the operator
in the operator's native language, making
sure that the operator comprehends their
contents, before use of this equipment is
authorized. If any doubt exists as to the safe
and proper use of this device, remove from
service immediately.
Inspect before each use.
Do not use if
abnormal conditions such as cracked welds,
damaged, loose or missing parts are noted.
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain
instructions for future reference.
Specifications
Model
Capacity
Chassis
Length
Handle
Length
Min Saddle
Height
Max Saddle
Height
1VW32
2-1/2 Ton
29-3/4"
49-7/8"
4"
20"
1AVR1
3 Ton
31-3/4"
51-1/2"
4"
23"
Westward
®
Hydraulic Quick Lifting
Service Jack SUV
SHI 037
Printed in China
082012
Front
Wheel
Figure 1- Model 1AVR1 Nomenclature
Saddle
Lifting Arm
Caster
Handle
Fork
Handle
(Release Valve)
Operating Instructions Manual
1VW32 and 1AVR1
!
WARNING
!
WARNING
