ITH-Series Technical Manual
Page 24
Cambridge
Engineering
Inc.
Installation
D
ECO
-G
RILLE
(O
PTIONAL
)
Series ITH heaters are approved for the addition of Deco-Grille either directly to the heater reflector or as
part of a T-Bar installation where the heater is above the ceiling structure. (Figure 22 and Figure 23).
Figure 22: Deco-Grille and Heater Installation
Figure 23: Deco Grille with Suspended Ceiling Installation
Install from Outside of Shield and
hold with Screws from Outside
Notch
Deco-Grille Support
for Hangers
& Supports
Fasten to End Cap & Deco-Grille
Supports
Fasten with Screws
At Every 5ft Section
Reflector
Deco-Grille Panel
Deco-Grille Cross Strap
Deco-Grille End Angle
Deco-Grille Support
Install End Cap
as usual
Reflector Shield
(Cut to fit Deco-Grille)
Notch Reflector Shield
as required for Hangers
and Reflector Supports
T-Bar Suspended
Ceiling
2" Min.
T-Bar
Shield
Install End Cap as per
"Installation of End Cap"
Figure
Deco-Grille
Panel
Reflector
