ITH-Series Technical Manual
Page 18
Cambridge
Engineering
Inc.
Installation
Note:
Reflectors should overlap adjacent reflectors 4" to 6". Be sure not to tile reflector sections;
that is, reflector sections must be either above both adjacent reflector sections, or below both
adjacent reflector sections. (
Figure 15
).
Figure 15: Reflector Overlap Illustration
Reflector
Support
Loose
Screws
Tight
Screws
Loose
Screws
Tight
Screws
Reflector Overlap
Approx. 6"
Fasten Endcap
with Screws
