Cambium cnPilot Home R200, User Manual

Page: 93 / 171

Chapter 3: System planning FXS1
Page
3-53
Carry Port
Information If or not carry port information in the SIP URI.
Signal Port The local port of SIP protocol, default is 5060.
DTMF Type Choose the DTMF type from Inbound, RFC2833 and SIP INFO.
RFC2833
Payload(>=96) User can use the default setting.
Register Refresh
Interval The interval between two normal Register messages. You can use the
default setting.
RTP Port Set the port to send RTP.
The device will select one idle port for RTP if you set “0”; otherwise use the
value which user sets.
Cancel Message
Enable When you set enable, an unregistered message will be sent before
registration, while you set disable, unregistered message will not be sent
before registration. You should set the option for different Proxy.
Session Refresh
Time(sec) Time interval between two sessions, you can use the default settings.
Refresher Choose refresher from UAC and UAS.
Prack Enable Enable/Disable prack.
SIP OPTIONS
Enable When you set enable, the device will send SIP-OPTION to the server,
instead of sending periodic Hello message. The sending interval is Keep-
alive interval.
Primary SER
Detect Interval Test interval of the primary server, the default value is 0, it represents
disable.
Max Detect Fail
Count Interval of detection of the primary server fail; the default value is 3, it
means that if detect 3 times fail; the device will no longer detect the primary
server.
Keep-alive
Interval(10-60s) The interval that the device will send an empty packet to proxy.
Anonymous Call Enable/Disable anonymous call.
Anonymous Call
Block Enable/Disable anonymous call block.
Proxy DNS Type Set the DNS server type, choose from A type and DNS SRV.
Use OB Proxy In
Dialog If or not use OB Proxy In Dialog.
Reg Subscribe
Enable If enable, subscribing will be sent after registration message, if not enable,
do not send subscription.