Cambium cnPilot Home R200, User Manual

Page: 122 / 171

Chapter 3: System planning Administration
Page
3-82
Resync Random
Delay(sec) Set the maximum delay for the request of synchronization file. The
default is 40.
Resync Periodic(sec) If the last resync was failure, CnPilot Home R200x will retry resync
after the “Resync Error Retry Delay ” time, default is 3600s.
Resync Error Retry
Delay(rec) Set the periodic time for resync, default is 3600s.
Forced Resync
Delay(sec) If it’s time to resync, but CnPilot Home R200x is busy now, in this case,
CnPilot Home R200x will wait for a period time, the longest is “Forced
Resync Delay”, default is 14400s, when the time over, CnPilot Home
R200x will forced to resync.
Resync After Upgrade Enable firmware upgrade after resync or not. The default is Enabled.
Resync From SIP Enable/Disable resync from SIP.
Option 66 It is used for In-house provision mode only. When use TFTP with
option 66 to realize provisioning, user must input right configuration
file name in the webpage. When disable Option 66, this parameter has
no effect.
Config File Name It is used for In-house provision mode only. When use TFTP with
option 66 to realize provisioning, user must input right configuration
file name in the webpage. When disable Option 66, this parameter has
no effect.
Profile Rule URL of profile provision file
Note that the specified file path is relative to the TFTP server’s virtual
root directory.
Table 79 Firmware Upgrade
Field Name Description
Upgrade Enable Enable firmware upgrade via provision or not.
Upgrade Error Retry
Delay(sec) If the last upgrade fails, CnPilot Home R200x will try upgrading again
after “Upgrade Error Retry Delay” period, default is 3600s.
Upgrade Rule URL of upgrade file