Cambium Networks PTP 650 Series, User Manual, Page: 296 / 395

Chapter 6: Configuration and alignment SNMP pages (for SNMPv3)
Table 87 Step 1: SNMP Configuration attributes (for SNMPv3)
Attribute Meaning
SNMP Minimum
Privilege Level Minimum security level which is permitted to administer SNMP security
settings.
Only displayed when Identity Based User Accounts are Enabled on the
User Accounts page (
Table 77 ).
SNMP State Enables or disables SNMP.
SNMP Access
Control Enables or disables access control to SNMP management by IP
address.
SNMP Access
Control Internet
Address 1/2/3 A list of up to three IPv4 or IPv6 Addresses permitted to perform SNMP
management.
Only displayed when SNMP Access Control is set to Enabled.
SNMP Version SNMP protocol version: v1/2c or v3.
SNMP Security
Mode MIB-based: SNMPv3 security parameters are managed via SNMP MIBs.
Web-based: SNMPv3 security parameters are not available over SNMP,
but instead are configured using the SNMP Accounts page, as
described in
Step 3: SNMP User Policy Configuration (for SNMPv3) on
page 6-65 .
SNMP Engine ID
Format Specifies whether the Engine ID is generated from the MAC Address,
IP4 Address, Text String or IPv6 Address.
SNMP Engine ID
Text Only enabled when SNMP Engine ID Format is set to Text String. Text
used to generate the SNMP Engine ID.
SNMP Port Number The port that the SNMP agent is listening to for commands from a
management system.
Page
6-63