Chapter 6: Configuration and alignment
System menu
Most of the configuration can be restored from the backup. However, certain attributes that were
part of the configuration are not saved or restored automatically. Use the web interface to
reconfigure the following attributes:
•
Usernames, passwords and roles for the web-based interface.
•
Key of Keys
•
HTTPS Entropy
•
HTTPS Private Key
•
HTTPS Public Key Certificate
•
HTTP Access Enabled
•
HTTPS Access Enabled
•
Telnet Access Enabled
•
HTTP Port Number
•
HTTPS Port Number
•
Telnet Port Number
•
Encryption Algorithm
•
Encryption Key
•
SNMP Control Of HTTP And Telnet
•
SNMP Control of Passwords
Procedures:
•
To save the configuration:
o
Click Save Configuration File.
o
Save the file using the format MAC-mm-mm-mm_IP-iii-iii-iii-iii.cfg, where
mm-mm-mm is MAC address of unit and iii-iii-iii-iii is Internet address of unit (IPv4 or IPv6,
depending on IP address label).
•
To restore the configuration:
o
Click Browse and navigate to the PC folder containing the saved configuration file (.cfg).
o
Click Restore Configuration File and Reboot.
o
Click OK to confirm the restore. The configuration file is uploaded and used to reconfigure
the new unit to the same state as the old unit. On completion, the unit reboots.
Page
6-36
