TLC Scanner 4
Instruction Manual, June 2018
Page 15
Fig. 8: The lamp compartment
5.5
Compartment illumination lamp exchange
•
Remove the knurled screw Fig.9 (1) of the PM-cover on the front
side. Pull the PM-cover towards left Scanner 4 side and take it
out of the Scanner (2). Inset the PM-cover carefully in the op-
posite manner (3) Fig.9 and Fig.10.
•
Be careful! Do not damage the filter holder.
•
Rotate the fluorescent tube about 90 degrees and remove it ac-
cording to Fig.11.
•
Mount a new tube and make sure it sits properly in the holder.
(4W tubes: UV-254 # 352.0014 - UV-366 # 352.0013)
•
Slide the PM-cover carefully back into stop position (3) and re-
place and tighten the knurled screw (1) Fig.9.
(UV-filter in PM-cover # 692.0025)
Fig. 9: Handling of the PM-cover for illumination lamp exchange.
(1)
(2)
(3)
Summary of Contents for 027.6200
Page 1: ...INSTRUCTION MANUAL TLC SCANNER 4 ...
Page 22: ......
