TLC Scanner 4
Instruction Manual, June 2018
Page 4
•
The instrument contains highly sophisticated electronics and
optical parts. It may be operated only in a non-condensing at-
mosphere in the temperature range outlined in the chapter
"Technical Data". Before installation and use, the instrument
should be acclimated properly
•
Use a damp lint free cloth for cleaning the instrument surface.
Do not employ aggressive detergents
•
Protect yourself and the instrument from electrostatic shock
which can cause damage to the electronic parts
•
Only authorized personnel may open the instrument. Service
and repair is only to be performed by trained specialists. Use
spare parts and consumables supplied by CAMAG only. The
warranty is voided if parts from other sources are used. Check
the service manual before you start service to reduce product-
specific risks
•
The power cord has to be removed before the instrument is
opened. It is not permitted to work on an instrument that has
been opened and is connected to the power supply
•
Use only the original, with the instrument delivered power cord
type
•
If the instrument is found to be defective, it must be switched
off and steps must be taken to ensure that it cannot be switched
on by mistake
•
If liquids penetrate the inside of the instrument, the power has
to be disconnected immediately. Small amounts of liquid can be
wiped off and/or dried with a of a blow dryer, with larger
amounts of liquid a service technician has to be called. A test of
functionality has to be performed in all cases
•
Carry out all safety checks and the preventive maintenance as
recommended by the manufacturer in order to assure your per-
sonal safety and the full functionality of the instrument. Have
an authorized service specialist perform any service not de-
scribed by this manual
•
See original manufacturers' manuals for further safety data on
third party equipment supplied with the system
•
Lift/move/transport the system with the necessary care and with
sufficient manpower (install the transport security devices if ap-
plicable, transport it only in the original packaging)
•
The safety of any system incorporate with the equipment is the
responsibility of the assembler of the system
Summary of Contents for 027.6200
Page 1: ...INSTRUCTION MANUAL TLC SCANNER 4 ...
Page 22: ......
