TLC Scanner 4
Instruction Manual, June 2018
Page 10
Fig. 5: Placement of TLC/HPTLC plate and magnetic strip
3.6
Optional Foil-Holder/Plate-Stopper
•
The standard plate stopper is in a fixed position and is for glass
TLC/HPTLC plates. It can also be used for foils.
Note: with foils there is a 2 mm offset in Y direction!
•
When mainly TLC/HPTLC foils are used, replace the standard
plate stopper (2) with the special foil holder 115.6217 (1). Fig.6
•
To replace the standard plate stopper remove the two knurled
screws (3) and take out the plate-stopper. Then mount and
screw on the optional foil-holder.
•
With the two knurled screws loosened the foil holder can be
moved into the desired position: front position for “foils”, back
position for “plates”. When finished retighten the knurled
screws.
Summary of Contents for 027.6200
Page 1: ...INSTRUCTION MANUAL TLC SCANNER 4 ...
Page 22: ......
