11/36
3.
SAFETY INSTRUCTIONS
3.1.
Explanation of the safety decals
If the decals are damaged or missing, please replace them.
Make sure that all the safety messages are legible.
Replace damaged stickers by asking the manufacturer for new ones.
If the part to be replaced bears a sticker, ensure that a new sticker is applied to the new part.
Decal
Explanation
Reference
1. Warning
2. Important: carefully read the manual before
using the equipment and carrying out the
maintenance operations
3. Important: risk of limb crushing
4. Important: pressurised liquids
165TA4750
Cylinder with plunger rods.
Danger: Pressure supply only after complete
sideshifter assembly
166TA5960
3.2.
General safety instructions
• Do not operate the equipment unless you are qualified and authorised to do so.
• The person responsible for the use of the equipment must make sure that all of the safety
rules in force in the country of its use are applied, to guarantee that the equipment is used
in conformity with the use for which it is intended and to avoid any dangerous situation for
the user.
• The operator should wear safety shoes and gloves when using or maintaining the
equipment.
• People who come into contact with this equipment and apply procedures, working
practices or use tools that are not described in this manual, are responsible for the safe and
proper operation of the equipment.
• Never allow people to climb onto the equipment or load, or walk under it.
• Do not use the equipment to lift or transport people.
• Do not use the equipment for any other purposes than those intended.
• Never exceed the maximum allowed capacity that is indicated on the type plate.
• The safety precautions and warnings are indicated in the manual and on the equipment by
means of visual messages.
• Failure to pay attention to these warning messages may jeopardise the safety of the
operator with serious consequences for himself and other people.
