23/40
7.2.
Operating instructions
Please see chapter 8 for the daily maintenance schedule.
• The lifting device with attachment installed needs to be approved for use prior to
commissioning.
• Be sure to obtain the manufacturer’s certification concerning the residual capacity of the
lifting device, after installation of the attachment.
7.2.1. Load lifting
Perform the daily maintenance check before each use as described in chapter
‘8.3. Maintenance instructions’’.
Before starting
First, use the hydraulic levers to check which levers operate which function.
Operate all the functions several times with no load to check if they function normally and smoothly.
Before lifting a load, operate the forks several times to remove air from the circuit.
Using the forks for loading and lifting
1. The load must be positioned against the back of the forks and not towards the tips of the
liftingforks.
2. The forks must be spaced inside the pallets.
After lifting the load, always position the forks in the centre.
Correct pick-up
Incorrect pick-up
Correct pick-up
Forks
Incorrect pick-up
Forks
Summary of Contents for HF-T Series
Page 32: ...32 40 11 ANNEXES 11 1 CE certificate...
Page 33: ...33 40...
Page 38: ...38 40 NOTES...
Page 39: ...39 40 NOTES...
