cam CALIBRO S164, Manual

Page: 19 / 88

18
INSTRUCTIONS FOR USE
if it is
but not
s a 2-
he lap
cars).
s, the
of the
above
re that
on the
arness:
same
safety
rapped
justed
sitions
d when
e been
adrest,
of the
rest so
tected;
h the
Reclining the seat
Note: The seat can only be reclined in
group 1. It can be used in the upright
position, the reclined position and in
one of the intermediate positions.
Note: The seat must always be used in
the upright position in groups 2 and 3.
7. To recline the seat, pull the recline
adjustment handle and at the same
time move the seat forwards or
backwards until the required recline
position is reached. Note: after
releasing the handle in the required
position, push the car seat until a click
is heard. Always check that the car seat
is locked in the chosen position.
How to secure the child in the car
seat
8. Securing the child with the insert
fitted. For the child’s safety: use the
insert for children weighing less than
15 kg. The insert guarantees the
correct support and comfort for
smaller children. Always secure the
child in the car seat using the safety
harness. Do not rest the car seat on
raised surfaces (table, changing table)
when the child is seated in the car seat.
Position the car seat so that the ends
of the harness cannot be damaged by
being shut in the car doors, by the
adjustment of the seats, etc.
Securing the child using the 5-point
car seat harness
9. Press the adjuster and at the same
time pull both of the car seat safety
straps. Do not pull the pads wrapped
around the straps.
10. Press the red button on the buckle
to open it.
11. Move the straps so they rest on the
sides of the car seat. Sit your child in
the seat.
12. Bring the tongues together and
insert them into the buckle. A click is
heard indicating the harness has been
fastened correctly.
13. Adjust the height of the harness
straps so they are just above the
child’s shoulders. Make sure the straps
rest perfectly on the child’s shoulders.
14. Pull the adjuster strap towards you
to ensure the harness fits the child
snugly. Tighten the harness, make sure
it is not twisted.
How to tighten the straps.
15. Pull the adjuster strap
towards you to make the safety
harness fit your child snugly. Do not
pull the strap upwards or downwards.
Do not leave the end of the adjuster
strap so that it is free or hanging
down: always secure it to the car seat
fabric. Checks to be made to ensure
that your child is always fitted securely
in the car seat. For your child’s safety:
Always check that your child is
strapped in properly and secured
firmly by the car seat harness. Always
check that the straps are adjusted
properly in height and length. Check
that the straps are not twisted.
16. Always check that the tongues are
fastened properly in the buckle.
How to fit the car seat in the vehicle.
For the protection of all the occupants
of the car:
In the event of an accident or a sudden
emergency stop, anyone who is not
wearing a seat belt or items that are
not securely fastened, may injure the
other occupants of the car. Always
check:
- that the backrests of the seats are
locked in position (for example, check
that the rear folding seats are securely
in position).
- that heavy or pointed items or other
items in the car (for example, any
items in the compartments) are
secured firmly in place.
- that all the occupants of the car are
wearing seat belts.
- that the child car seat is secured to
the seat even when it is not in use,
using the car seat belts or with the
Isofix and top tether system.
Do not place anything between the
child car seat and the seat.
Installation for group 1 (9-18 kg.)
with the Isofix and Top tether
system
Find the two Isofix anchorage points
CALIBRO 6 dicembre 2017 15 lingue_Layout 1 06/12/17 17:38 Pagina 19