cam CALIBRO S164, Manual

Page: 17 / 88

16
INSTRUCTIONS FOR USE
IMPORTANT! Read the instructions carefully and keep for future reference.
Your child’ s safety could be at risk if you do not follow the instructions.
IMPORTANT! Only use the product for the purpose that it was designed for.
Should the product be used for any other purpose the manufacturer declines all
responsibility. Never use replacement parts other than those supplied or
approved by Cam Il Mondo Del Bambino, as this could cause damage to your
product and make it unsafe. IMPORTANT! CAM IL MONDO DEL BAMBINO S.P.A
reserve the right to alter or modify any product for technical or commercial
reasons without prior notice. WARNING! Never leave the child unattended in the
car seat! WARNING! This car seat must be replaced in case of impact caused by
car accident.
Group 1 (from 9 to 18 kg.) – securing with the IsoFix system
This is an ISOFIX child restraint system, approved to standard ECE R44, series 04
amendments. Suitable for general use in vehicles fitted with IsoFix anchoring
systems. The restraint system can be fitted in car seats provided with standard-
approved IsoFix attachment points. Consult the car instruction manual to check
the compatibility of the various seats to the size and anchor points of your own
restraint system. This child safety seat belongs to the following weight group
and IsoFix class: Group 1 (from 9 to 18 kg.), class B1. This child safety seat has
been classified as “universal” as it meets the requirements of more stringent
tests than those of the past.
Groups 2 and 3 (from 15 to 36 kg.) – securing with seat belts and IsoFix
connectors. This restraint device has been classified as “Semi-universal” and is
approved according to Standard ECE R44 series 04 amendments. It can only be
used in the cars specified in the paragraph “list of compatible cars”. This
restraint system may be fitted on the seats of some cars that do not appear on
the list. In case of doubt, contact the manufacturer of the restraint device or the
dealer. The safety of your car seat can only be guaranteed if the instructions
have been followed correctly and the car seat has been fitted accordingly. Do not
place unrestrained objects on the rear panel or rear seat of the vehicle, as this
could cause injury in case of braking or an accident. • ensure that all luggage or
objects that could cause a potential hazard in the case of an accident are firmly
secured. All passengers should be aware of how to release the child from the car
seat in case of danger or an accident. the car seat should be replaced
immediately if involved in an accident. Pay particular attention, that neither the
car seat, nor any of it’s parts, become trapped or crushed, in doors or
mechanism of the motor vehicle. The safety belt used must be pulled tight to
remove any slackness, and the car seat harness, must be adjusted correctly to
fit the childs body. Ensure the the belts are not twisted in any way! Pay attention
to the fitting of the abdominal belt, ensuring that it is positioned low down, to
ensure that the pelvis is held firm and correctly protected. Even when travelling
without a child, the car seat must be fully restrained at all times. Do not use the
car seat without the fabric upholstery covering. The fabric upholstery must not
be replaced with any other than original parts, or those recommended by the
manufacturer, as this constitutes an integral part of the restraining system. The
upholstery can be washed in warm water (max 30°), with a mild neutral
detergent. Do not tumble dry, do not iron, and do not use solvents. Should any
problems arise during the fitting, or use of this product, contact the
manufacturer. Please note that group 1-2-3 stage car seats can be used on the
front seat and are exempt from the regulation of not being fitted when an airbag
CALIBRO 6 dicembre 2017 15 lingue_Layout 1 06/12/17 17:38 Pagina 17