61
Tool Bar Introduction
Button
Meaning
Screen mode button.
Click it to disable OSD. Click to
enable OSD.
Click it to show full screen.
Right click on the full screen to
exit full screen.
Click “All Main Stream” or “All
Sub Stream” to set the stream
of all the cameras.
Manual alarm button. Click it
to pop up a window and then
trigger and clear the alarm-out
in the window manually.
Click it to preview all the
cameras.
Click it to close all the preview
cameras.
Click it to start recording. Click
to stop recording.
Click it to enable talk with
the DVR.
Right Panel Introduction
Click
on the right panel to show the
panel and click
to hide the panel.
Click
at the bottom of the panel
to go to “PTZ” panel. Click
to go to “Operation” panel.
Click one camera window in the preview
area and then click
to set the
camera’s live preview stream and record
stream to main stream in manual record
mode; click to
set the camera’s
live preview stream and record stream
to sub stream. In sub stream tab, set
the resolution, FPS and bitrate and then
click “Apply” to save the settings.
Operation panel introduction:
Button
Meaning
Click it to snap.
Click it to start recording; click it
again to stop recording.
Click it to zoom in the image of the
camera and then drag the mouse
on the camera image to view the
hidden area.
Click it to zoom out the image of
the camera.
The 3D zoom in function is
designed for P.T.Z. Click the button
and then drag the image to zoom
in or zoom out the image; click
the image on different areas to
view the image of the dome omni-
directionally.
Click it to close the preview
camera.
Click it to enable audio and then
drag the slider bar to adjust the
volume. You can listen to the
camera audio by enabling audio.
PTZ panel introduction:
Button
Meaning
Click
/
/
/
/
/
/
/
/
to rotate the dome; click to stop
rotating the dome.
Drag the slider to adjust the
rotating speed of dome.
Click
/
to zoom in/out
camera image.
Click
/
to increase/
decrease the focal length.
Click
/
to increase/
decrease the iris of the dome.
Click it to view the preset list
and then click the button in the
list to call the preset.
Click it to view the cruise
list and then click the
corresponding buttons in the
list to start or stop the cruise.
12 Remote Surveillance
Summary of Contents for CS-DR8900
Page 68: ...68...
