Cam Scan CS-DR8900, User Manual

Page: 25 / 68

25
5.1 Preview Interface
Introduction
The connected analog camera will be
added automatically in the live preview
interface for previewing. You should
add IP camera manually for previewing
(see 4.2.1 Add Camera for details). Refer
to the interface as shown below, drag
one camera in the preview window to
another window for camera window
exchanging.
Click the preview window to show the
tool bar as shown in area 1; right click
the preview window to show the menu
list. The tool bar and menu list are
introduced in the table below.
Button Menu List Meaning
-
Move tool. Click it to move
the tool bar anywhere.
Manually
Record On
Click it to start recording.
Instant
Playback
Click to playback
the record; click “Instant
Playback” to select or
self-define the instant
playback time. See 8.1
Instant Playback for
details.
Enable Audio
Click it to enable audio.
You can listen to the
camera audio by enabling
audio.
Snap
Click it to pop up the snap
window. Click “Save” in the
window to save the image.
Click “Export” to export
the image.
PTZ Control
Click it to go to PTZ
control interface. See
Chapter 6 PTZ for details.
Button Menu List Meaning
Zoom In
Click it to go to single
channel amplification
interface.
-
Click it to go to image
adjustment interface.
Refer to 5.3.4 Image
Adjustment for details.
Camera Info
Click it to view the IP
camera information.
The single channel amplification
interface is as shown below. Press and
drag the blue box to select the zoom in
area. Click
/ to zoom the image.
Click the camera selection box to select
other cameras for amplification. Click
“Back” to return to the live preview
interface.
5.2 Preview Mode
5.2.1 Preview By Display Mode
Set different screen modes and
cameras’ display sequences as
required and then save the display
modes classified by surveillance areas,
priorities and so on. Refer to the picture
below. Double click one display mode
in the display mode list to view the live
images in this mode.
5
Live Preview Introduction