Regarding to mount the unit As we have described you
before , you have to prepare the mast head for the mecha-
nical installation. Align the North mark of the Ultrasonic
Portable Mini, in order to have it pointed towards the bow.
After, install the sensor in a location free from wind pertur-
bation, usually on the mast head. Other important aspects:
- Do not attempt to access the transducers area with your
fingers;
- Do not attempt any modification to the unit;
- Never paint any part of the unit or alter its surface in any
way.
If you have any questions or doubts, please contact us
directly.
9.2. Maintenance and repair
The ultrasonic Portable Mini does not require great main-
tenance thanks to the avoiding of the moving parts in this
new design.
Transducers must be kept clean and aligned. Impacts or
incorrect impulsive handling may lead to transducers
misalignment.
The space around the transducers must be empty and
clean. Dust, frost, water, etc... will make the unit stop
working.
8.3. Warranty
This Warranty covers the defects resulting from defective
parts, materials and manufacturing, if such defects are
revealed during the 24 months purchase period.
Warranty is void in case of non-following the instructions
of use, repair or maintenance without written authorisa-
tion.
This product is for leisure purposes exclusively. Any wron-
gful use given by the user will not incur in any responsibility
of Calypso Instruments. Therefore, any harm caused to
the Ultrasonic Portable Mini by a mistake will not be cove-
red by the guarantee. Using assembly elements different
from those delivered with the product will void the guaran-
tee.
Changes on transducers position/alignment will avoid any
warranty.
For further information please contact Calypso Technical
Support through
or visit
www.calypsoinstruments.com
.
7. Compatible Apps
(continuation)
·Sailing Anemotracker App
·Sentinel Marine Solutions
·iRegatta
·eStela
·SailRacer
·SailGrib
·EDO sailing instruments
·Weather4D
·Among others...
*These Apps got to be compatible. Please check current
compatibility and features on their websites.
Our hardware is open source.
We are a hardware firm but we developed and maintain
Sailing Anemotracker App to be used with our products.
We realize that our users' diverse needs require tailored
solutions beyond our imagination and that's why we
decided from minute one to open our hardware to the
world.
We encourage third party software and hardware firms to
integrate our hardware on their plattorms at their will.
Here you learn how to connect to our hardware. You can
replicate the product signal so you don't need to get one to
start playing right away.
We made communication as simple as possible; however,
if you need support, do not hesitate to contact us either by
email (
) or phone
(+34 876 454 853).
8. General information
8.1. General recommendations
The Ultrasonic Portable MINI has been calibrated with
accuracy, following the same calibration standards for
each unit.
08/09
09/09
ULTRASONIC Portable
User manual
