32 / EN
VII.- HEATER OPER
Before using your water heater, make sure you read and follow the instructions in this
manual and all the product labels.
¡WARNING!
Make sure your heater is completely full of water before starting it; if you start your
heater without water, it will damage the electrical resistance (heating element), and
will void the warranty.
Operation and Temperature Regulation.
Turning the heater On/Off
The water heater is turned on an off by pressing the button (the screen will turn
on). By pressing the button again the equipment will turn off (the screen will turn off).
Temperature regulation
•
Press + to increase or - decrease the temperature.
•
The temperature can be adjusted between 30°C - 50°C.
•
An agreeable temperature for a shower or bath is between 41°C and 43°C.
Wire
Grounding diagram
Copper rod
(Copperwed),
½
”
diameter x 1 m long
FIG. 7
