ATD<n>
Establishes a
Packet Data Session
based on profile <n> as set using the ^PRFL
command or browser based configuration ‘profile number’ on the ‘Data
Connection’ page.
If the selected profile is configured for PAD client mode a PAD session is
established to the host defined in the profile.
ATD<phone number>
Originates a
Circuit Switched Data
call to <phone number>
ATD<host>[:<port>[:<protocol>]
Originates a PAD session to the <host> and <port> <protocol> provided.
The <host> parameter may be an IP address or hostname.
The <port> parameter is optional if not supplied the port number from the currently
selected profile is used.
The <protocol> is optional and may be one of “TCP” or “UDP”, if not supplied the
protocol from the currently selected profile is used.
CDM800 Series V.250 Manual
Page 19 of 33
To suit software version 1.52.2
4/4/2008
