![background image](http://html1.mh-extra.com/html/calimet/cm6-dcfp/cm6-dcfp_instruction-manual_3448173011.webp)
Installation
Step
6
: Gate Travel Limit
This controls the position of where the gate stops when it opens and closes.
1. Use a screwdriver to loosen the nails on the top and bottom limit cams
2. Turn left or right on both limit cams to adjust the position of where the gate opens and closes. Figure 9
TIP: Use the OPEN, CLOSE, STOP buttons on the gate operator circuit board for faster testing
3. Use the screwdriver and screw back in the limit cam nails
Youtube
More detail on travel limit programming: https://youtu.be/_DeVM5dgZPs
Finished!
You are now finished installing your gate operator.
Figure 13
10