![background image](http://html1.mh-extra.com/html/calimet/cm6-dcfp/cm6-dcfp_instruction-manual_3448173007.webp)
A. DO NOT allow the arm to touch the gate operator's hood when the gate is in the open
position. Too much stress is put on the arm in this position during gate operation.
Figure 6
A. Preferred arm position is 90° from the open gate.
B.
Distance between door and machine: 2" min
Installation
Figure 5
C.
6
NOTE: If dimension between open gate and wall is 20" to 32" then compact installation is
necessary. (See Figure 7)