background image

CALIFORNIA ACCENT LIGHTING, INC.

2034 E. Lincoln Ave. #431, Anaheim, CA 92806

ph. 800.921.CALI (2254) or 714.535-7900  \  fx. 714.535.7902

[email protected]  \  calilighting.com

© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.

Installation Instructions

Overview

lip

LEDs

LLED

8350-UC

11 of 11

CLEANING MATERIALS FOR LENSES AND EXTRUSIONS

The use of solvents and/or cleaners which are not compatible with polycarbonate will result in the softening, crazing, and/or cracking of the 
plastic part. This is especially true of polycarbonate lamps and mounting bases which may be under stress in their normal applications.

COMPATIBLE WITH POLYCARBONATE:

 

• Mild soap and water 

 

 

• Mineral Spirits   

 

• Isobutyl alcohol

 

• VM and P Naphtha 

 

 

• Varsol No.2 

 

 

• Mexane

 • 

Freone 

TF 

and 

TE-35 

  • 

Ethanol 

   • 

Dirtex 

    

 
 

• 2% Sol. Reg. Joy   

 

 

• 10% Sol Bon Ami  

 

• White Kerosene   

 

 
 

• Methyl alcohol   

 

 

• Heptane 

 

 

• Petroleum Ether/65 degrees C 

 
 

• Isopropyl alcohol   

 

 

• Lacryl PCL-2035 polycarbonate cleaner

  

NOT COMPATIABLE WITH POLYCARBONATE:

 • 

Trichlor 

    • 

Gasoline   • 

ll 

Liquid 

Detergents

 

• Acetone  

 

 

 

• Carbon Tetrachloride 

 

• Pink Lux (Phosphate free)

 

• Triclene 

 

 

 

• Chlorinated Hydrocarbons   

•#1 & #3 denatured alcohol

 

• Methyl Ethyl Keytone (MEK)  

 

• Texize-8006, 8129, 8758   

• MIBK   

 

 

 

 
 • 

Liquid 

Cleaner 

– 

8211 

  • 

Toluol 

   • 

Agitene 

   

 
 • 

Benzol 

    • 

Ajax 

   • 

Kleenol 

Plastics 

  

 
 • 

Lysol 

    • 

Stanisol 

Naphtha 

  • 

Oils

 

• Lemon Joy (phosphate free)  

 

• Diversol 

 

 

• Lestoil

Summary of Contents for lipLEDs LLED8350-UC












Reviews: