13
Tuner Operation
Radio Menu
Touch to access desired function:
1. Display source menu
2. Display audio/video setting menu
3. Current time
4. Tuner information
5. Touch to tune automatically.
P r e s s m o r e t h a n 2 s e c o n d s t o t u n e
manually.
6. Select previous/next preset station.
7. Show next menu
RADIO
RADIO
8. Tuner information
9. Preset stations
10. Touch to tune automatically.
Press more than 2 seconds to tune
manually.
11. Band switch
12. Auto search and store stations
13. Show previous menu
RDS Basics
RDS service availability varies with areas.
Please understand if RDS service is not
available in your area, the following service is
not available.
AF Mode
AF (Alternative Frequency): When the radio
signal strength is poor, enabling the AF
function will allow the unit to automatically
search another station with the same PI
(program identification) as the current station
but with stronger signal strength.
Touch [
] button on the source menu to
enter the unit system setup menu, touch
[Radio] to enter radio setting menu, then
select AF on or off.
AF ON: AF function is activated.
AF OFF: AF function is disabled.
Remark: AF indicator on LCD will flash until
RDS information is received. If RDS service
is not available in your area, turn off the AF
mode.
TA Mode
Some RDS FM stations periodically provide
traffic information.
TP
(Traffic Program Identification)
Broadcasting of traffic information
TA
(Traffic Announcements Identification)
Radio announcements on traffic conditions
Touch [
] button on the source menu to
enter the unit system setup menu, touch
[Radio] to enter radio setting menu, then
select TA on or off.
When TA mode is turned on, the TA indicator
will blink.
When traffic announcement is received, the TA
indicator will display. The unit will temporarily
switch to the tuner mode (regardless of the
current mode) and begin broadcasting the
announcement at TA volume level. After the
traffic announcement is over, it will return to
the previous mode and volume level. When
TA is turned on, SEEK, SCAN, AMS function
can only be received or saved when traffic
program identification (TP) code is received.
