8
USB /SD/MMC Card Operation
Using SD/MMC Card
1. To open the panel first, press the
button
on the panel. Insert an SD/MMC card into
the corresponding slot, the unit will load the
files automatically.
2. To remove the card, you should first select
another source, in order to avoid damaging
the card, then slide down the panel, press
the card slightly, and take off the card after
it popped out.
Note: You can control the panel using
the touch panel control, refer to previous
section: “Panel Control”.
*
The panel will not close if the card was not
fully inserted or was not removed after it
popped..
Using USB device
1.
Connect your USB device to the USB cable
which you placed in the dashboard or glove
box during installation of the car radio.
When connecting a USB device, the unit
will read the files automatically.
2.
To remove the USB device, you should
first select another source, in order to avoid
damaging the USB device.
USB/SD/MMC Notes
USB functions (flash memory type) MP3 music
play
1. SD/MMC card support
2. USB flash memory 2 in 1 support
3. Fat 12/fat 16/fat 32 is possible
- Fat 12/16 (dir: 200 support, file: 500
support)
- Fat 32 (dir: 200 support, file: 500 support)
4.
File name: 32 byte/dir name: 32 byte /tag
name: 32 byte
5. Tag (ID3 tag ver 2.0)
- Title/artist/album: 32 byte support
6. USB 1.1 support
USB 2.0 support
(It can not support USB 2.0 speed. Just,
get the same speed with USB 1.1)
N o t a l l k i n d s o f U S B d e v i c e s a r e
compatible with the unit.
