E - 25
Bluetooth Operations
Searching This Unit for Pairing
“from a other Bluetooth Device ”.
1. Set the other Bluetooth device which need
to be paired with this unit into “Searching”
mode.
7. If the pairing is successful, the below display
will be show on TFT:
If the pairing failed, the below display will be
show on TFT for 3 seconds:
and the unit will automatically switch back to
the previous mode.
2. When searching is completed, “BT70”
should appear in the Bluetooth device,
select “BT70' & confirm to start the pairing
process.
3. Once the below display show on the TFT:
press the button to confirm & start the
pairing.
?
B
TIPS
To cancel the Pairing, you can press the
“CLEAR” button at any time.
4. Password Input: user can input minimum 1
& up to maximum 4 of any numeric
number between 0 to 9, as the password for
this unit.
5. Press button to confirm the password
input, and the Pairing process should start.
6. In the pairing Bluetooth device, user should
input the same password which was
input as above in step 4.
NOTE
To allow this unit searching by the other
device, the “VISIBILITY” in the SYSTEM
MENU of BLUETOOTH must be set to
“SHOW”. Please refer to SYSTEM
MENU of BLUETOOTH for more details
of how to set the “VISIBILTY” mode.
Please refer the instruction manual of
your BLUETOOTH device on how to
enter into the BLUETOOTH device
searching mode.
NOTE
Please make sure to keep the PAIRING
BLUETOOTH device within 2 meters from
this unit when making the pairing.
NOTE
If this unit is connected to a BLUETOOTH
device, this unit cannot be detected
(searched) by another BLUETOOTH
device. User should first disconnect the
current connected device, in order to
allow this unit to be detectable
/searchable by another BLUETOOTH
device.
During the PAIRING, only the Clear,
Volume & Mute buttons are functional,
all the other function keys are disabled
& non-operational during the pairing
mode.