CalderaSpas paradise series, Owner'S Manual

Page: 20 / 40

18
OPERATING INSTRUCTIONS
JeTs BuTTOn
The "JETS" button is used to activate the jet pump(s). Pressing "JETS" button once will illuminate the jets symbol on the control panel display. The
symbol will remain lit until the jet pump(s) are turned off, or after one hour of continuous operation when the pump(s) are automatically shut off by the
control system.
salIna ™ MODel :
1 • st press = low speed of jet pump 1 4 • th press = low speed of jet pump 1 & high speed of jet pump 2
2 • nd press = high speed of jet pump 1 5 • th press = high speed of jet pump 2
3 • rd press = high speed of jet pump 1 & 2 6 • th press = jet pumps off
MarTInIQue ® MODel:
1 • st press = high speed of jet pump 1 3 • rd press = high speed of jet pump 2
2 • nd press = high speed of jet pump 1 & 2 4 • th press = jet pumps off
kauaI ® MODel:
1 • st press = jet pump on 2 • nd press = jet pump off
lIGHTs BuTTOn
The “LIGHTS” button activates the LED lighting system and controls its intensity. Pressing the “LIGHTS” button operates the light as follows:
1st press of the “LIGHTS” button: light intensity on high •
2nd press: light intensity on medium •
3rd press: light intensity on low •
4th press: lights off •
If the lights are left on, they will automatically be turned off by the control system after six hours of continuous operation. The light symbol on the
control panel will also turn off.
If the lights will not turn on, make sure SPA LOCK is deactivated. SPA LOCK disables the controls on both the main and auxiliary control panel. (See
the SPA LOCK section for more information on the SPA LOCK feature.)
sYsTeM MODe
Your spa is equipped with a System Mode. This function will allow you to conveniently turn the jet(s) on high speed and the light on maximum
intensity. If your spa is equiped with a wireless music system it will not turn the music on, however when the system mode is deactivated the wireless
music system will turn off.
To activate the system mode, perform the following functions:
Press the "MODE

" button until
SYSTM
is displayed on the screen. Press the "ON

" button to activate the
SYSTM
mode feature.
NOTE: Once activated, any of the functions may be changed without effecting anything else.
To deactivate the system mode, press the "MODE

" button until SYSTM is displayed on the screen. Press the "OFF

" button to deactivate.
lITe+ Menu
Your spa lights can display in a variety of different colors, different intensities as well as run through a continuous sequence of colors. To activate this function the
following is required:
Press the "LIGHTS" button on the control panel to activate spa lights and the 1. LITE+ menu.
On the control panel press the "MODE 2.

" or "MODE

" button to scroll to the LITE+ menu. Once displayed, press the "ON

" button to enter the COLOR menu.
Press the "ON 3.

" button again to start the color wheel.
NOTE: Press the "OFF

" button to stop the color wheel if a specific color is desired.
To stop the color wheel, press the "MODE 4.

" or "MODE

" button to scroll to the LITE+ menu. Once displayed, press the "ON

" button to enter the COLOR
menu. Determine which color you would like to stop on, then press the "OFF

" button.
TOOls Menu
The TOOLS menu is one of the main menus on the control panel. Within the TOOLS menu are five submenus, which consists of; Clean, Temp
Lock, Spa Lock, Summer Timer and Exit.
To enter into the
TOOLS menu, scroll through the main menus using the "MODE

" or "MODE

" button until the TOOLS menu is displayed.
Press the "ON

" button to enter into the TOOLS submenu, use the "MODE

" or "MODE

" button to scroll through the submenus. Once the
desired submenu is displayed, press the "ON

" button to activate the submenu or press the "OFF

" button to deactivate the submenu. To leave
the TOOLS submenu, scroll through the submenu until EXIT is displayed, press the "ON

" button to exit the submenu.