U
ser
'
s
G
Uide
— 17
Note:
The clock symbol will continue to blink on the display to remind you the Timer is
running when in “calculator” mode.
timer Beep –
After a count-down Timer is finished counting down
(zero reached), it will begin to beep. Timer 1 emits a fast beep, Timer 2
a slow beep. The Timer will beep for 10 minutes. To stop the Timer
beep, press the
n
key.
turning Calculator Off (running timer) –
To turn the calculator off
while the Timer is running, press
. The first press
of
beeps and reminds you of the running Timer; the second
press turns the calculator off.
timer reminder and alarm –
If you are in “calculator” mode and
do not press a key for 11 minutes, the running timer will be displayed
as a reminder. Also, in case you forget the timer, after the timer
alarm goes off it will begin counting up for an additional hour,
displaying the “+” sign to remind you of the amount of time elapsed
since the alarm sounded.
auto Shut-Off (running timer) –
As long as the Timer is running,
the unit will not auto shut-off. However, once the Timer reaches the
maximum running time and expires (see max. times below), the
calculator will auto shut-off after about 8-12 minutes of non-use.
• Count-up timer: stops upon reaching 12 hours
• Count-down timer: stops upon reaching 1 hour, 11 minutes.
appendiX
errors
When an invalid conversion is attempted, the calculator will display the
word
Sorry
for a few seconds before returning to the original display.
When an invalid entry or calculation is made,
error
will be displayed.
reset
If your calculator’s display should ever freeze or “lock up,” press Reset,
a small hole located to the right of the
key, using the end of a
paper clip.
accUracy
Each calculation is carried out internally to 10 digits.
aUto shUt-off & battery
auto Shut-Off:
After 11 minutes of non-use (no running Timer).
Batteries included:
One CR2032 battery.
Battery-Life:
1,975 hours.
UG8305E-C.indd 17
4/28/2014 11:46:05 AM
