Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 55
Phase 2 Proposal
Select an entry from the Proposal table.
Tunnel Configuration Table
Edit
Click the Edit button to edit the properties of a tunnel.
Delete
Click the Delete button to delete the tunnel .
Proposals
The Phase 1 and Phase 2 Encryption, Authentication, DH Group and Life Time parameters can be changed from this
section. The Delete button is displayed only for proposals that are not referenced by any Tunnel configurations.
3.6.4
GRE
The GRE page is used to add and delete GRE (Generic Route Encapsulation) tunnels. Current tunnels are listed below.
Up to two networks that lie beyond the tunnel may be specified and routes to those networks are automatically
created when the tunnel is established. Static local and remote IP addresses are necessary to allow for the tunnel
automatic (re)connection.
Note:
All subnets must differ from one another and must not overlap.
If more than two remote user subnets are necessary, additional routes can be setup manually via the Router »
Static Routes tab using the Tunnel IP Address as the gateway.
Figure 40: Security — GRE
GRE Tunnel Configuration
Tunnel Name
The name associated with the tunnel.
