10/12/13
TTU-12x0 Hardware & Installation Guide - PULS Wiki
https://puls.calamp.com/wiki/TTU-12x0_Hardware_%26_Installation_Guide
16/36
o APN 0 & 1: telstra.internet
Vodafone Ireland (MCC 272, MNC 01)
o APN 0 & 1: isp.vodafone.ie
o Username: vodafone
o Password: vodafone
Vodafone New Zealand (MCC 530, MNC 01)
o APN 0 & 1: internet
o Username: guest
o Password: guest
Vodafone UK (MCC 234, MNC 15)
o APN 0 & 1: internet
o Username: web
o Password: web
Unless otherwise stated, the username and password will be set to “dummy”.
This feature can be disabled by setting Bit 0 of S-Register 155.
AT$APP PARAM 1024,35,1,1
To re-enable auto-provisioning, use:
AT$APP PARAM 1024,35,1,0
Auto-provisioning occurs when the LMU detects a SIM with a new operator ID (i.e. the first 6 digits of the IMSI) or when
Bit 0 of S155 is cleared and the GPRS context is blank (i.e. Parameter 2306,0).
4.3 Activating GSM or HSPA LMU using AT Commands
Check with the CalAmp Sales team for availability of the TTU-12x0™ with GSM or HSPA modems. For a
GSM/GPRS operator you will get the LMU in one of two varieties, one with a SIM and one without.
If you get an LMU without a SIM (which is the typical case) the operator will simply ask for the IMEI of the LMU. The IMEI
(International Mobile Equipment Identifier) is printed on the bottom of the LMU under the LMU’s ESN. Again, DO NOT
give the operator the ESN of the LMU.
The operator will provide you with a SIM for each account activated. If they are especially nice (or you are especially
persistent) they will also give you a list tying the IMSI (International Subscriber Identifier) of the SIM to the phone number
assigned to it. Please note that the operator will likely tie the IMSI (i.e. the SIM) to a specific IMEI. Making sure the specific
SIM matches to the right IMEI isn’t strictly necessary, but it will keep everyone’s book-keeping a little cleaner. You may also
obtain this information by running a CSV report in PULS (after the devices have connected to the network and sent in their
first ID Report). See the PULS Users Guide for more information.
If you do happen to have a SIM, the operator will ask for the IMSI and ICC-ID (Integrated Circuit Card Identifier) along
with the IMEI of the LMU. Again, in return you should get a list of IMSIs and Phone Numbers.
The IMEI, IMSI and ICC-ID are all available through the ATI1 command. The IMEI should also be printed on the bottom
of the LMU.