CONFIGURATION
001-9193-001 Version 1
Page 37 of 48
Sentry 4G 900
TM
User Manual
Figure 23 - Interface Priority
5.7
General Settings
5.7.1
General
Se
ttings-Unit ID
The Sentry4G unit identification number is configured under General Settings
Unit ID.
5.7.2
Advanced
Se
ttings-Password
The Sentry 4G unit’s web interface management login details are modified using the Password tab of
the Advanced Settings page.
To change the login details, enter the current and new password. The new password must be
entered twice (reconfirmed).
5.7.3
General
Se
ttings-Remote Administration
Figure 24 - Remote Admin
5.7.3.1
Remote Admin
Remote Configuration:
Selecting Enabled will allow remote access to the unit’s
configuration screens through the WWAN network connection. Selecting Disabled will shut off
the ability to remotely access the unit’s configuration screens.
Configuration Port:
Change the port of incoming requests. It is not necessary to change
this parameter unless it conflicts with other devices on the network.
Users can be logged into a single unit both locally and remotely at the same time.
Changes made on one end will not be reflected on the other unless the web page is
refreshed.
5.7.3.1.1
Example of Remote Login
