001-5006-000_FCC.docx
Page 47
001 00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
---
2-33
001-4006-101
�
Binary Pattern - The packets will be 16 characters in length and have a sequence number every 16
characters, starting at 0x00 and incrementing to 0xFF, then wrapping around to 0x00 again.
The pattern used to build the packets will have the following format (in Hex):
00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
01 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
02 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
-- 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
FE 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
FF 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
01 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
02 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
-- 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
�
Random Binary Pattern - The packets will be 16 characters in length and contain random binary data.
# of Packets
# of Packets allows the user to set the number of packets in each transmission.
Packet Delay
Packet Delay allows the user to set the amount of time (in seconds) to delay between each packet
transmission, ranging from 0.00 to 30.00 seconds (in 0.25 second intervals).
Com Port
Com Port allows the user to select the COM port (primary or secondary) for data transmission.
2.5.15 ASCII / HEX TERMINAL
Terminal Screens allow the user to select an ASCII or Hexadecimal Terminal Screen for the Primary and
Secondary COM Ports (configured in the Port Settings screen - see Section 2.5.2.1) Data is sent according
to the port configuration set up in the Port Settings screen.
2-34
001-4006-101
ASCII / HEX TERMINAL
Terminal Screens allow the user to select an ASCII or Hexadecimal Terminal Screen for the Primary and
Secondary COM Ports (configured in the Port Settings screen - see Section 2.5.2.1) Data is sent according
to the port configuration set up in the Port Settings screen.
