001-5006-000_FCC.docx
Page 43
diagnostics, showing the most recent
Short ID Filter List
Filter ID List is a listing of Remote IDs setup in the Diagnostic IDs and Alarms Screen. This list is used
for
selecting a filter.
Progress
The Progress panel shows the sorting progress of the diagnostics if a filter was changed.
2-28
001-4006-101
Pause
The Pause check box allows the user to pause the reception of the diagnostics for scrolling through the
grid.
Clear
The Clear button allows the user to clear the display and current Online Diagnostics.
Save
The Save button allows the user to save the current Online Diagnostics to a file. A maximum of 4096
lines
of data can be saved.
2.5.12 USER TEST
Figure 2-19 User Test Screen
The User Test utility is an Offline function and requires suspension of network operation. A User Test‟s
diagnostic parameters include:
RSSI Level
Received Signal Strength Indication (in dBm)
Battery Voltage
Supply voltage (in volts)
Temperature
Internal temperature (in degrees Celsius)
Forward Power
Forward power (in watts)
2-29
001-4006-101
Reverse Power
Reverse power (in watts)
Preamble Good
The number of correctly decoded transmissions received in the last 15. Used with Preamble Total, this
serves as an indication of how well the unit is receiving data.
Preamble Total
The number of total transmissions detected, maximum is 15. Used with Preamble Good, this serves as an
indication of how well the unit is receiving data.
