manualshive.com logo in svg

Cal Spas 1100 Electronic Series, Owner'S Manual

The Cal Spas 1100 Electronic Series is a luxurious and versatile hot tub offering top-of-the-line relaxation and therapeutic features. Enhance your spa experience by downloading the Owner's Manual for free from our website, where you can find detailed instructions and guidelines tailored to this exceptional product.

Share
Download
background image

(1-7) MASSAGE MODES

Demo Mode

After turning on the Pump and Pulse modes,  press and hold both the UP

and Down Buttons together for two seconds

then release.  In this mode, every twenty (20) seconds this system will automatically switch to the next massage mode.
Once the user finds the perfect massage mode, pressing either the UP or DOWN button will 

T

ime Reset Mode

Pulse will normally run for 15 minutes then time-out. 

The user might press the pulse button for another 15 minute ses-

sion, if the user wants to use it one more time, a green LED will blink and the pump will run on H1 speed mode as
part of a 15-minute cool down period. After that, the pump will stop automatically and the green LED light on the panel
will continue to blink for a period of 1 minute then shutoff automatically.

Pulse Mode System

Pulse mode system will shut of

f for two hours unless reset by the following procedure. During this time the pump will

run at a maximum speed.

1.

In the off position, press the pulse mode 1 time.

2.

Power green light will flash to indicate reset.

IMPORT

ANT:

This system will automatically turn itself of

f after fifteen (15) minutes of operation. The 

system can be restarted again by pressing the pump on/off button and the Pulse on/off 
button. After the second fifteen minute session, the system will run through a cool down 
cycle for up to two (2) hours. In this cool down mode, the user will only be able to 
operate the pump (by again pressing the pump on/off button). However, the massage 
modewill remain off until the cool down mode is completed.  

Owner

’s Manual 

Adjustable Therapy System

Page 26

Owner’s Manual

Summary of Contents for 1100 Electronic Series









































































































































































































































































































































Reviews:

No comments

Related manuals for 1100 Electronic Series

Cal Spas Home Resort Z-524L Owner'S Manual preview
Home Resort Z-524L
Brand: Cal Spas Pages: 70
UNIPRODO UNI POOLS 20 User Manual preview
UNI POOLS 20
Brand: UNIPRODO Pages: 37
Jacuzzi Gatsby Mechanical Operation And Repair preview
Gatsby
Brand: Jacuzzi Pages: 45
Image IMSB63102 User Manual preview
IMSB63102
Brand: Image Pages: 20
treesse minipool Quarz Operating And Maintenance Manual preview
minipool Quarz
Brand: treesse Pages: 100
EAGO AM156 Installation Instruction preview
AM156
Brand: EAGO Pages: 9
BullFrog 2002 Spas Owner'S Manual preview
2002 Spas
Brand: BullFrog Pages: 42

Brands by name

Popular brands

Load more brands