2010 Barbecue Grills
LTR20101038, Rev. A
Installation /
Assemb
ly
www.calflamebbq.com
10
Installing Side Burners
Assemble a 3/8” pipe nipple to the 3/8” pipe
1.
tee using Teflon tape or pipe sealant. Use only
sealant that is approved for use on LP gas.
Install the pipe tee assembly to the grill intake
2.
pipe. Tighten assembly and align the branch
opening of the tee with the hole of the cabinet.
Connect the flexible hose (male end) to the pipe
3.
tee.
Install and secure the side burner into the island
4.
by simply setting it in place.
Connect the female end of the flexible hose to
5.
the side burner intake pipe.
Connect gas supply to the grill.
6.
Check for gas leaks using soap water solution.
7.
C
B
A
B
C
A
Connect the last open line to the side burner
(Use gas rated tape seal on all connections)
Then take other end of "T" adapter with hose attached
and connect to end of male located underneath and at
the back of the grill. (Use gas rated tape seal on all
connections).
Open barbecue door. Install hose with regulator on propane
tank. Then connect other end to "T" adapter. Make sure to
use gas rated tape seal when installing adapter to insure
proper seal.
Grill
Items Included with Barbecue
1) "T" adapter (3/8")
2) 2 each Hose 3/8" Fittings
3) Regulatorw/ Hose
NOTE: You will need to use a gas rated
sealer on gas connectors that are not flared.
To Propane Tank
3/8" Fittings
From Grill
From Side Burner
"T" Adapter (3/8" Threaded)
To side burner, located
underneath behind burner.
To grill, located
underneath and
behind grill
GAS LINE
C
B
A
B
C
A
Connect the last open line to the side burner
(Use gas rated tape seal on all connections)
Then take other end of "T" adapter with hose attached
and connect to end of male located underneath and at
the back of the grill. (Use gas rated tape seal on all
connections).
Open barbecue door. Install hose with regulator on propane
tank. Then connect other end to "T" adapter. Make sure to
use gas rated tape seal when installing adapter to insure
proper seal.
Grill
Items Included with Barbecue
1) "T" adapter (3/8")
2) 2 each Hose 3/8" Fittings
3) Regulatorw/ Hose
NOTE: You will need to use a gas rated
sealer on gas connectors that are not flared.
To Propane Tank
3/8" Fittings
From Grill
From Side Burner
"T" Adapter (3/8" Threaded)
To side burner, located
underneath behind burner.
To grill, located
underneath and
behind grill
GAS LINE
Summary of Contents for BBQ00841P-20
Page 1: ...LTR20101038 Rev A 4 30 10...
