CalAmp | LMU-26xx Install Guide
Page 38
MBUD-0199v3.3
6 DE-INSTALLATION INSTRUCTIONS
Follow the instructions below for field de-installation of the LMU-26xx.
1.
Identify the location of the installed device.
2.
If re-closable fastener tape holds the LMU-26xx in position, remove the LMU-26xx from the vehicle
by separating the re-closable fastener tape.
3.
If necessary, cut any zip-ties and discard.
To install a new device, you will need new zip-ties.
4.
Disconnect the primary 20-pin wiring harness from the device.
5.
Ensure the wiring harness is in an available position for new device installation.
