CalAmp | LMU-26xx Install Guide
MBUD-0199v3.3
Page 15
5.1.2 INSTALLATION IN EXPOSED AREA
If the LMU-26xx is installed in a vehicle with an open cab exposed to the weather, a NEMA rated
enclosure suitable for the application must be used to seal out moisture. A recommended alternative is
a TTU-2820 sealed device available from CalAmp.
5.2 INSTALL POWER CONNECTIONS
The LMU-26xx requires a continuous 12 Volts and an ignition switched 12 Volt signal to operate
correctly.
For Harness 5C908 and 5C260, the LMU-26xx power leads with in line fuses are supplied as part of the
wiring harness.
For harness 5C261, the power and ground are an integral part of the harness, but
must be
installed with
the vPOD or jPOD.
Figure 10: LMU-26xx Standard Wiring Harness (P/N: 5C908)
