CalAmp | LMU-26xx Install Guide
Page 8
MBUD-0199v3.3
4.3 PROTECTION FROM HEAT
We recommend that you do not place the LMU-26xx in an unusually warm location such as directly near
heater vents, hot engine components or in direct sunlight.
Refer to
Section3.3: Environmental Specifications
for the maximum temperature tolerated by the
LMU-26xx.
4.4 VISIBILITY OF DIAGNOSTIC LEDS
Status LED lights on the front of the LMU-26xx provide valuable information about the operation of the
device. When feasible, attempt to install the LMU-26xx in such a way that the lights are visible with
reasonable ease.
You may find it useful to be able to view the LEDs periodically to make sure that the LMU-26xx is
operating properly. If you encounter a problem or poor performance with the LMU-26xx, you may need
to read the LEDs to troubleshoot the issue. If you cannot resolve the issue, you will need to provide the
LED information to the CalAmp Customer Support Team.
Refer to
Section 5.7.2: Status LEDs
for information on how to interpret the lights.
4.5 CABLE LENGTH
The harness cables, which are provided for connecting to the LMU-26xx to the vehicle or other auxiliary
device, should be used at the length provided. Do not cut cables. Instead, coil any excess cable length,
making sure not to crimp or flatten the cables.
Figure 5: Coil Excess Cable
