CalAmp | LMU-26xx Install Guide
Page 26
MBUD-0199v3.3
5.6.2 SERIAL/AUX 2
– GARMIN SERIAL CABLE
The Serial/AUX2 port can be used to provide a connection to a CalAmp certified Garmin Personal
Navigation Device (PND). You must install the Garmin Serial Cable (P/N 133688) to establish the
connection between the LMU-26xx and the Garmin PND. This cable comes with the correct Molex
connector mate.
To Install the Garmin Cable via AUX2 Serial Port:
1.
Connect the Garmin Serial Cable’s 5-pin serial to the LMU-26xx AUX2 serial port.
You can identify the LMU-26xx AUX2 serial port by the white/orange and white/yellow wires pinned
to one of the Molex connectors.
Figure 27: LMU-26xx and Garmin PND Cable Connection
2.
Connect the Garmin Serial Cable to the certified Garmin PND.
3.
If the LMU-26xx is powered on, communications between the LMU-26xx and the Garmin PND will
begin working without further configuration.
Connection to
Garmin PND
