27
Initial Settings
Before you use the SONAR V-STUDIO 100 hardware to control SONAR, load the VS-100 plug-in and configure settings
to enable it.
1.
Make sure that the SONAR V-STUDIO 100 hardware is connected to your computer, and then start
up SONAR.
2.
In SONAR, choose “Options | Controllers/Surfaces” to open the “Controllers/Surfaces” dialog box.
3.
Click the “Add Controller/Surface”
button. The “Controller/Surface Settings” dialog box
appears.
4.
In the “Controller/Surface Settings” field, choose “VS-100.”
5.
Select the controllers’ Input Port and Output Port. Select “CONTROL (VS-100)” for both the Input
Port and the Output Port.
6.
Click [OK] to close the dialog box.
7.
In the “Controllers/Surfaces” dialog, make sure that the “WAI” check boxes and the “ACT” check
boxes are selected, and click [Close].
If you’re using an Edirol PCR series unit as an external MIDI keyboard, use the dedicated plug-in for the PCR
series. Details on settings and using the plug-in are provided in the section
“Edirol PCR Controllers”
of
the online Help.
MIDI Controllers/Surfaces Settings
Loading the VS-100 Plug-in
What is ACT?
ACT (Active Controller Technology) is functionality that lets you operate SONAR from an external device
such as a MIDI controller or surface. The plug-in effect or software synthesizer that’s active in SONAR will
automatically be the target of control.
For details, refer to the
“ACT”
section in the Online Help.
VS-100_install_e.book 27 ページ ２００９年３月９日 月曜日 午後８時５６分
