Analyzing Network Performance
6-8 Cajun P220G Switch Configuration and Operation G uide
!# "
Configuring an RMON (Remote Monitoring) mirror port enables you to mirror incoming
traffic from a port or set of ports to a specific mirror port, where you can attach a sniffer
or RMON probe. The switch supports a single mirror port and a single source port for
each switch fabric port. For example, 24-port Fast Ethernet media has two fabric ports
(one for ports 1 through 12, one for ports 13 through 24). You can set up a single source
port and a single mirror port for each set of ports associated with a fabric port. You can
also choose to mirror all traffic from a particular fabric port to the mirror port. You can
also set up multiple source ports to mirror traffic to a single mirror port. This structure
sounds complicated, but the interface enforces the rules automatically.
To set up an RMON Mirror Port, complete the following steps:
1. Select Sampling from the menu on the left side of the Web Agent. The Port
Mirroring Information screen displays (Figure 6-4):
Figure 6-4. Port Mirroring Information Screen
.
2. Select a source port for the traffic by clicking the appropriate selection in the
Configure Source column.
3. Select the port whose configuration you want to change by clicking on the port
number. The Port Mirroring Configuration screen displays (Figure 6-5):
Summary of Contents for P220G
