Cajun P220G, Configuration And Operation Manual

Page: 108 / 135

Using the Command Line Interface
Cajun P220G Switch Configuration and Operation Guide 8-15
Parameters
Table 8-11 lists the net command parameters:
Table 8-11.
net
Command Parameters
Example
The following command sets an IP address and subnet mask for the switch’s inband
connections:
P220> net ip address inband 127.115.106.254 255.255.255.0
delete Deletes the indicated address.
address Assigns an IP address to the indicated interface.
ethernet_console Front panel 10BASE-T interface.
inband CPU inband connection.
default_gateway Sets the location (IP address) of the router port for the subnetwork
that interface resides on.
address IP address, expressed on decimal dot notation (nnn.nnn.nnn.nnn).
mask Subnetwork mask for the subnetwork. The subnetwork mask
separates the network address from the host addresses. For example,
the subnetwork mask 255.255.255.0 means that the first three
numbers in an IP address are common for all hosts on this subnet.
display arp_cache: Displays the current ARP (Address Resolution Protocol)
table entries for this host. This information can be useful for resolving
connectivity problems because it identifies IP addresses that this host
has “seen.”
interfaces: Lists identification for the interfaces.
route_table: Displays the route_table for the switch.