6
Rev022520
Installation
Desired Gate Width:
48”
54”
66”
60”
78”
72”
Step 5
Illustration A
Step 5
Illustration B
Both fasteners are required
to secure tubes together.
Step 4
Illustration A
Step 4
Illustration B
NOTICE
The 1
3
/
4
” Lift Arms have a series of pre-drilled holes to allow for adjustable gate width. See Size Reference
Table (page 4) to determine available width adjustment.
NOTICE
To protect the Powder Coat finish, do
not slide beyond desired length.
STEP 4.
Slide 1
3
/
4
” Lower Lift Arm (
green decal
) into 2” Lift Arm (
red decal
) to the desired gate width.
a. Insert
3
/
8
” x 2
1
/
4
” hex bolts aligning with pre-drilled holes and tighten
3
/
8
” nylock nuts.
5
4
9.4
Green
Decal
9.6
STEP 5.
Use rubber mallet to gently hammer flange bearings into both sides of 1
3
/
4
” Lower Lift Arm.
a. Slide the Gate End (
green decal
) over the 1
3
/
4
” Lower Lift Arm
(
green decal
).
b. Insert
3
/
8
” x 2
3
/
4
” hex bolt and tighten
3
/
8
” nylock nut.
5
9.1
9.3
9.8
6
Green
Decal
Green
Decals
© CAI Safety Systems | (951) 465-7386 | https://caisafety.com | [email protected]
